STRUCTURAL ROD SYSTEMS

THE RONSTAN ROD SYSTEM

RONSTAN STAINLESS STEEL TIE RODS: The lightweight structural solution.

THE RONSTAN ROD SYSTEM With the trend toward structures of steel and glass, reflecting a new age of technology, Ronstan stainless steel rods stand alone to fulfil the most challenging of rigging demands.
The Ronstan Rod system is a simple and effective architectural rigging system, used where innovative design requires a marriage of tension and compression loads. Easily specified, easily installed and easily adjusted they are a fast and effective tensioning solution; the integrity of stainless steel enhancing even the simplest of applications.

RANGE OPTIONS:

Fork/Fork Specifications >>

Eye/Eye Specifications >>

Fork/Joiner Eye Specifications >>

THE RONSTAN ROD SYSTEM:

  • Full range in U.N.F. threads for fine adjustment.
  • Fittings fully load rated and tested.
  • Seven rod sizes 1/4in. (6.35mm) to in. (25.4mm) available covering loads from l6kN to 220kN (3,590 lb to 49,520 Ib).
  • Joiners available to connect rods for lengths over 3.6m (12 ft).
  • Forks and eyes can also be used with threaded swage terminals in cable systems.
  • Fittings and rods can be manufactured in other stainless grades to order.
  • Rolled threads for increased strength.

SUITED TO APPLICATIONS:

  • Roof truss bracing.
  • Tension elements for glazed walls and roofs.
  • Structural supports.
  • Structural bracing.
  • Suspension rods.

Product specifications and Rod Load/Diameter Selection Data.
Rod System specification.

 
Site Map © 2000-2005 allspars.